Welcome to GuzziTech.com   Guest     

Banner
 

Enter Amount:

GuzziTech.com Forum • Error codes for 5AM ECUs

Error codes for 5AM ECUs

Technical, non-model specific data for all new Guzzis.. post it here!

Moderators: john zibell, toddhaven, Fader

Error codes for 5AM ECUs

Postby GT-Rx » Sat Jan 14, 2012 12:40 pm

Thanks to Dan R:

Covers the big blocks with the 5AM ECU:

FAULTS ECU. The dashboard receives from the central computer only actual faults
Description / Error code
Error throttle valve C.C. Vcc ECU 10
Error throttle valve C.C. Gnd ECU 11
Error Engine temperature C.C. Vcc ECU 14
Error Engine temperature C.C Gnd ECU 15
Error Air temperature C.C. Vcc ECU 16
Error Air temperature C.C Gnd ECU 17
Error Low battery ECU 20
Error Lambda sensor ECU 21
Error Ignition coil 1 C.C. Vcc ECU 22
Error Ignition coil 1 C.C. Gnd ECU 23
Error Ignition coil 2 C.C. Vcc ECU 24
Error Ignition coil 2 C.C. Gnd ECU 25
Error Injector 1 C.C. Vcc. ECU 26
Error Injector 1 C.C. Gnd ECU 27
Error Injector 2 C.C. Vcc ECU 30
Error Pump relay ECU 36
Error Local Loop-back ECU 37
Error relay starter C.C. Vcc ECU 44
Error relay starter C.C. ground ECU 45
Error cannister C.C Vcc ECU 46
Error cannister C.C. ground ECU 47
Error battery high ECU 50
Error ECU general ECU 51
Error instrument panel ECU 54
Error autoadaptation Tito I ECU 55
Error vehicle speed ECU 56
Error stepper C.A. ECU 60
Error stepper C.C. Vcc ECU 61
Error stepper C.C. Ground ECU 62
Error unknown ECU 00
Todd at
GuzziTech.com
SoCal GuzziTech Power Since 2001!

Image Image
User avatar
GT-Rx
Administrator
 
Posts: 3942
Joined: Wed Jul 01, 2009 5:29 pm
Location: SoCal U.S.A.

Re: Error codes for 5AM ECUs

Postby Oz1200Guzzi » Sat Jan 14, 2012 1:52 pm

Thanks Todd
Regards,

Tony

Black 1200 Sport ('07) - the faster one...
User avatar
Oz1200Guzzi
Cruisin' Guzzista
 
Posts: 158
Joined: Mon Sep 14, 2009 12:48 pm
Location: NSW, Australia

Re: Error codes for 5AM ECUs

Postby Mi_ka » Sat Jan 14, 2012 2:49 pm

By the way, any idea if:
Are the error codes sent once & then cancelled by ECU to dashboard special "clear" command / looped every x seconds from the ECU to dashboard?/ once on ignition ON etc or whenever?
Michail,
a Guzzista at heart
Mi_ka
Cruisin' Guzzista
 
Posts: 451
Joined: Fri May 14, 2010 1:05 pm
Location: Thessaly, Greece


Return to CARC

Who is online

Users browsing this forum: No registered users and 1 guest

cron